0.2-1.5mm thickness JZ20 series leveling machine

Precious 4-high roller leveler machine by manual for 1.0-6.0mm thickness
This is semi-automatic & economic type 4-high roller leveling machine, roller gap adjusted by manual in the guidance of digital display, so operator can crank the two hand wheels to adjust leveler’s straightening performance. It equip with φ60mm leveling rollers, suitable for leveling middle thickness metal plates.

Material can be processed:
All kinds metal plate work-piece, such as low carbon steel, Aluminum, copper, stainless steel, high tensile steel etc.

Use area:  
Perforated metal sheet, circle saw blades, clutch parts, lock panels, knives, automobile and motorcycle metal accessories, stamping parts, and electrical metal parts etc.
 
Precious 4-high roller leveler machine by manual
This is semi-automatic & economic type 4-high roller leveling machine, roller gap adjusted by manual in the guidance of digital display, so operator can crank the two hand wheels to adjust leveler’s straightening performance.

4-high roller leveling machine process principle
It’s based on “Bauschinger effect”, metal sheet was repeatedly twisted to make metal fiber gradually consistent, eliminate internal stress, restore and improve the flatness of work-pieces. So as to get ready for the subsequent process such as bending, welding and other processing procedures.perforated metal leveling machine
 

Machine main feature

  1. It's four-high roller level precious leveling machine, there are both support assistant roller set upper and lower leveling roller set. All rollers were well processed to ensure leveling accuracy.
 
  1. All leveling rollers adopt high quality bearing steel, finished quenching and tempering, precious machining, hard chrome plating, grinding etc. Surface hardness comes 58±2°(chrome layer thickness ≥0.05mm)
 
  1. All backup roller(support roller) adopt Japan export roller bearings. There are 2 columns or more columns backup rollers uniformly distributed upper and lower leveling roller sets, making leveling rollers bears pressure in balance.
 
  1. All gears adopt material of 20CrMnTi, finished forging, tempering, surface carburization, precious grinding etc. coming to grade IT6.
 
  1. Main bearings are Shielded and sealed NSK bearing made in JAPAN, it can well reserve itself stocked lubrication oil and prevent dust enters, so it doesn’t need to add lubrication oil on bearings.

  2. Roller gap adjusted by manual in the guidance of digital display, so operator can crank the two hand wheels to adjust leveler’s straightening performance.
 
  1. Main power transmission method: AC motor+ speed reducer+ universal joints, so machine runs smoothly.

  2. High precision and perfect working performance.

Additional Information

JZ20-S series MANUAL precious roller leveler
MODEL JZ20-200S JZ20-400S
Material Max. width 200mm 400mm
Leveling roller diameter 20mm
Max. thickness 1.5mm
Leveling capacity 0.2-1.5mm
Leveling roller quantity 21pcs(Upper 10pcs/Lower 11pcs)
Min. work-piece size 10 x 40mm
Backup roller column Both two columns upper and lower leveling roller set  Both three columns upper and lower leveling roller set 
Leveling roller gap adjust method Four points manual adjust
Leveling speed 0-12m/min
Voltage AC 3 Phase 380V 50HZ(Or local voltage

Remarks:                
JZ20-200S, "20" means leveling roller diameter is φ20mm, "200" means suitable for material Max. width of 200mm, "S" means roller gap adjusted by manual.                


 

Contact Us

24 hours online service